Dalsun’s 3 in 1 Wall Sealer

Dalsun’s 3in1 Wall Sealer is an economical modified acrylic based paint It can be used as Primer,surface as well as Exterior Emulsion.

Surface preparation:

For fresh/new surfaces, strip all the loose particles from the surface with wire brushing and by scraping, followed by a wipe down. Wash the surface down with water and allow it to dry. Apply one coat of Dalsun’s 3in1 Wall Sealer and allow it to dry for 6 to 8 hours.

For previously painted surfaces: Strip all the old paint and remove all the loose particles before starting the above process.

Directions for application:

• Dilute the paint as per the recommended dilution ratio.Thinning required is 30-40% by volume depending upon surface.
• Thinner/cleaner is potable water.
• Apply the first finishing coat and allow it to dry for at least 6 to 8 hours. After the first coat dries, apply the second coat and allow it to dry overnight.