Wallshine Premium Acrylic Emusion

Wallshine Premium Acrylic Emusion is Specially designed latex based paint for use on interior surfaces. Formulated specially for Interiors, it is used as Decorative & Protective paint. Durable & Long lasting finish. Finish is Smooth with angular sheen.

Recommended use: On masonary,primed plaster,weatherboards,concrete blocks,brickworks,cement render ceilings etc. For Interior use Features:

• Excellent washabilty
• Good stain resistance
• Smooth sheen
• Good hiding and coverage

Surface preparation

For fresh/new surfaces, strip all the loose particles from the surface with wire brushing and by scraping, followed by a wipe down. Wash the surface down with water and allow it to dry. Apply one coat of primer and allow it to dry for 6 to 8 hours. For previously painted surfaces: Strip all the old paint and remove all the loose particles before starting the above process.

Directions for application

• Dilute the paint as per the recommended dilution ratio.Thinning required is 40-50% by volume depending upon surface.
• Thinner/cleaner is potable water.
• Apply the first finishing coat and allow it to dry for at least 6 to 8 hours. After the first coat dries, apply the second coat and allow it to dry overnight.

Before Painting,you need to check few important points

• Moisture contents of wall.Ideal condition is less than 12%
• Ph value of surface should be between 7 to 11 under ideal conditions
• Strain the material through a fine sieve before use
• Keep the container tightly closed to prevent drying

POST PAINTING CARE For removing stains, wipe clean with a wet cloth. Ensure a drying time of minimum 2 weeks from application before clearning