THUNDER Premium Synthetic Enamel

THUNDER Premium Synthetic Enamel is manufactured with suitable alkyds, fine pigments and imported additives to give a mirror- like Gloss with a tough film

Surface preparation:

Initially sand the surface with coarse sand/water paper according to the type of surfaces to remove rust, dust and other loose particles. Wipe the surface clean. Apply properly thinned one or two coats of Dalsuns Primer. Before application of top coat, dilute the paint appropriately with Mineral Turpentine oil and strain it through clean cloth to get High-gloss finish giving overnight interval between the coats.Use felt roller to get an orange peel effect.

APPLICATION

Stir well before use. Apply with proper brush, roller or spray. Recommended thinning 10%-15%. Give overnight interval between the coats.

COVERAGE

It depends on many factors like surface condition, surface preparation, application skill, weather conditions, dilution etc.Approximately 80 to 100 sq ft per liter/2 coats depending on the nature and porosity of the Surface.